As standard supplied with ‘hold open’ function allowing free entry when required without operating the code. Function can be disabled on installation requiring code to be entered every time to open the door.
Light duty with stainless steel latch bolt head, with “anti-shim” plunger, 60mm (2 ⅜”) back set requires 25mm (1”) hole, 82mm (3 ¼”) deep.
50mm (2”) back set latch requires 25mm (1”) x 72mm (2 ⅞”) hole.
70mm (2 ¾”) back set latch requires 25mm (1”) x 92mm (3 5⁄8) hole.
Code Change Method
Requires removal of lock from the door. Locks are supplied with a random code commencing with the ‘C’ clear button. To change the code after fitting, the lock must be removed from the door.
The CL50 code chamber consists of 9 buttons from which the code is selected, and a ‘C’ button which is used to re-set the chamber after an incorrect entry, and which must always be used as the first digit of a code. Buttons may only be used ONCE in a code. For example, 1212 is not possible. A code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or 1342 or whatever sequence is most convenient to remember. With 9 buttons, a total of 511 different codes are available, any of which can be entered in any sequence.